itch.io

I appreciate you checking. I would normally think it's incompatibility as well, but since I tried in a blank test project with no other plugins installed, I think it's just the Q plugins. Might be due to the base engine having recently updated?

Oh. Oh shit. I had no idea.

Works pretty well once I got the load order right (all of the Q plugins at the very top). My only complaint is that followers don't work smoothly at all. It runs at one animation frame, stops, runs, stops, runs, over and over, and the followers lag very far behind pretty quick when using anything higher than the default setting of 1 for pixel/tile movement. And even when using the default setting, followers only use the first frame of the walk/run animation, and keep restarting on it.

Unfortunately, this issue persists even in an otherwise bare-essentials test project with only the 5 Q plugins active.

So, I was wondering if you'd be willing to consider implementing a fix for the followers plugin in particular? I would also appreciate if you could include load order guide/instructions to the product page, if it's not too much trouble.

Do let me know if you need anything from me! And thank you for your time.

Heya! Sorry if this isn't necessary, I just wanted to be sure the thread notified you I finally responded a bit ago. 

I am SO SORRY it took me so long to reply!! I didn't get any notif from Itch or anything and I finally thought to check back manually. :,D Here's the mostly-empty project. Click the signpost at launch. Dummy Project - gdrive

Hi again~

So I was messing with custom sprite animations, and I'm using Galv's Frames, CharacterAnimations, and Diagonal Movement (for MZ) but when I turn your plugin on, they all stop working right, no matter what order I have them in in my plugin list. Would you be willing to consider a patch for them? Right now the only order that doesn't throw an error is if Frames and CharacterAnimations is above Collision, and Diagonal Movement seems to need to be below. However, in this order, the frames for diagonal get ignored, and it just uses the default down-left-right-up frames.

I really don't want to re-edit all my sprite sheets again to use Collision's layout unless I absolutely have to. :,) Especially because it only seems to support 3 frames and I'm using 6 per idle/walk/run.

Thanks for the quick response. I appreciate you taking a look at things. I understand attempting to patch anything with VS involved can be finicky. :,)

Just your Book and MessageActions, and the alignment fix snippet plugin: https://gyazo.com/d246c19dde164f8fd162270bc8bb271f (Click off-and-on behavior is the same)

Your three plugins, + CGMZ Core and Encyclopedia only active: https://gyazo.com/b201a4e791fc25cd12c05207889b52df  (Same as before in item and encyclopedia scenes)

Do you need a completely blank sample project with only the 5 relevant plugins? Or do you want VS Core in as well, even though that seems to not be causing conflicts? And I'm assuming to remove the audio files.

I found a small issue, but I'm not sure if it's from your plugin or something else; though, it clears up when turning off your plugin. When going to a shop, the map name shows up next to the gold:

https://gyazo.com/08b8955e611f603263e0058b61339df9

Heya! This plugin seems to be exactly what I need for my project, but it's got some odd behaviors. First, I found this code snip in this thread, which while for MV, fixes the thing where when you click off and back on, the stuff inside the help/description window (where I'm using it) it was misaligning each time to the right. I don't know if you might consider just coding that functionality into the main plugin for MZ?

Also, while I'm using VS plugins and can preload images with its Core, I get this upon selecting the first item in the menu: https://gyazo.com/72472d50de35bf2186ee8189334e1839

It fixes itself when I click off and back on, however: https://gyazo.com/0ba7e059522484617643670db9b51ab6

And then a strange error, where the image is duplicated when the description is pulled into CGMZ's Encyclopedia plugin: https://gyazo.com/2995a3fa282e6f3c992e58c6c2251a6d -- I don't know if a compatibility patch is possible, or if you want me to ask Casper (the author) about it instead?

The item in the database, as far as I can tell, is written fine? https://gyazo.com/dc7e5280e20bbaba45b0a0f01c072a4b

Thanks for making this plugin available, by the way. I searched for *forever* for something that would let me do this and I'm so glad this exists.

Understood! Thank you, and I appreciate your quick response.

This is amazing, thank you so much! Works fantastic, super easy to figure out and everything.

Just a couple questions: Is there a way to show the current playtime along with the map and currency, and if so, how? If not, is that a feature you might be willing to add? I understand it's a free plugin, and may not be something you wish to prioritize, and that's fine!

Other question; how would I get the custom character portrait (in this case a vertical full body image) to show in the Status screen? There doesn't seem to be ways to customize anything but the initial menu. Although, I do use VS Core, and I've got your plugin at the bottom of the list where I should hope it's overriding everything, but I know some settings will still fudge each other.

Ah okay, I think I understand. Thank you~!

I see. Okay, thank you! I'll try to figure out something for the water. 
Does the Ignore Collision only affect the points you draw after ticking the box, or does it affect the whole shape at once? I'm not sure how to make half an object pass-behind and the rest not.

Also I got this error when my sprite collided with both a fully- and partially-purple polygon: https://gyazo.com/90cbfd84938845831d2d59492103138e

I'm not sure if it's a conflict or something else.

Hello~ I just nabbed this, and it seems, for the most part, ideal, but I have several questions.

I have a fairly large world map and I'd like to use a parallax for it. But it's got a giant lake smack in the middle, and slapping passable water tiles on top of it is gonna look icky since it's a hand-painted image that in no way aligns with a tile-based map.

So first question: How would I add collision (while still allowing boats) to a lake that takes up at least a hundred tiles in total area? I don't see a way right now to zoom out and select an entire swathe of map, and trying to add collision boxes to just the beach or land/water transition areas is... not ideal.
Screenshot of what I'm trying to work with (although the map is going to be redone): https://gyazo.com/387928a2900c1c26fe09914e7a23d939

There's also no documentation to speak of in the download folder, and I can't figure out what the curved arrow icon does other than turn a line a different color. What do the colors mean? And what does the "Ignore Collision" checkbox mean, exactly?

I appreciate you making this program, it really does seem great! Maybe I'm just missing something obvious. x)

This works perfectly. I was a bit confused at first but then I got it working. Thanks once again!

Understandable. And yeah. I noticed they obfuscated their code and as a rookie coder myself it's pretty frustrating. :,D Sometimes I just need to tweak a tiny facet and don't want to harass the creator for it.

Anyway, I'd like if you could go ahead and please have an option to toggle equip scene visibility, if it's not too much trouble. Thanks so much for being patient and quick to respond. 🙏

Thanks again~ It works.

I hate to keep asking for things, and I'm starting to feel like a pest :,D But I noticed this just now:

https://gyazo.com/6d10ecaa09cc99b6e4428aefa6ebc869

I use VS MenuCore and ItemsEquipCore. Would there be any way to take the durability numbers off the side panel? This should hopefully be the last request. (I'm not worried about the Undefined, since that updates properly when gear is acquired through normal means; ie chests, shop scene, and I assume other event-granted ways.)

Yes, exactly.

Awesome, thanks so much! It's working now. :D And hey don't worry about things, I really appreciate that you're so quick to respond and keep things up-to-date.

The only thing is that it still doesn't adjust alignment based on the NPC shop's gold price. I have another plugin allowing for granular/multiple currencies, so a way to offset the durability text alignment or just have it append to the item name instead of aligning all the way to the right would be lovely as well. Otherwise it's perfect.

Hello! I bought this plugin a few days ago. It seems to be working, but I have a bunch of VS plugins as well as CGMZ plugins. I'm not sure if it's a conflict or a limitation of your plugin. Whenever I add gear through the debug menu or attempt to buy it from NPC shops, it looks like this:
https://gyazo.com/dd09d98116e7e21371c5b3fa0ec33234
https://gyazo.com/f9f79f61d276ecc7f23cdf9b76668979

You can see the character Initial Equipment is fine, but everything beyond that isn't.

I'm not really sure what to do. I put your plugins at the very bottom of my plugin manager to try and ensure they overwrite other things but it doesn't change anything. I tried turning off suspected conflicting plugins too, but that didn't change anything either.

I appreciate any time you can offer!

[Edit] I tried on a completely vanilla game too. I wonder if the most recent game engine patch changed something?

https://gyazo.com/cf6c33e81f695c85bdb0902b2f8872bb